Depending on your environment, you may need to clean your machine all the more frequently (or less regularly) than others. Machine arrangement is paramount to consider; keeping your machine on the floor takes into consideration dust, hair, skin cells, and rug particles to get inside less demanding. In any case in the event that you keep your machine over the floor, as around your work area, particles are less inclined to getting access get to inside your machine.Do not open your computer while it is running or with any cables attached to it. It is always safer to remove all peripherals such as USB cables, audio cables, video cables, and especially the power cable.
Do not attempt to clean your computer with electricity flowing through its circuits. Be sure that the power cable is unplugged.
Tools
Before you begin opening your computer’s case, you’ll need to gather your cleaning tools.
There are a few tools you will need to clean your computer: Hardware set that includes screw drivers
- Can of compressed air
- Cleaning cloth
- Zip ties (optional)
- Scissors (optional)
- Cotton swabs (optional)
- Thermal paste (optional)
- Pencil or pen (optional)
To make the cleaning process easier, it’s best to take out any components that can be easily removed. Most desktop computers allow you to remove RAM sticks, video cards, and hard drives.
Cleaning
To start the cleaning process, begin with the peripherals we just removed. Grab your can of compressed air and hold the trigger to release a burst of air onto an area with a lot of dust buildup.
Next, we move inside the computer case. Let’s start with removing any dust particles that may have found their way inside the RAM slots. Take your compressed air can, aim it at a RAM slot, hold the trigger, and move it down the entire slot. Repeat this for every slot in your computer case.
Now we’ll move onto the bigger equipment inside such as your CPU fan and power supply unit. Again, it’s recommended to use a pen or pencil when cleaning fans to prevent the blades from spinning. Use your compressed air can to blow out any loose dust particles.
Finally, don’t forget to also clean out any other fans, ports, or enclosures as described above.
Your computer, inside and out, should be looking as good as new. We’ve rid our computer of dust, hair, skin particles, and much more. Your cables should be neatly managed and out of the way of fans and other sensitive equipment.
Read More:- Computer Repair Service Faridabad
